KOSUN

分类： KOSUN News

KOSUN exclusively manufacture solids control equipment,solids control system,mud recycling system,drilling waste management equipment,etc.Contact us N

  • Efficiency Analysis on Solids Control Equipment Removing Harmful Solid Phase

    READ: It is necessary to carry out regular efficiency analysis of solids control system in drilling site in orde to improve drilling fluids properties and better manage the cost. Generally speaking, the aggregate drilling fluids consumption in a well counts 10 to 20 times the volume of a borehole.

    It is necessary to carry out regular efficiency analysis of solids control system in drilling site in orde to improve drilling fluids properties and better manage the cost. Generally speaking, the aggregate drilling fluids consumption in a well counts 10 to 20 times the volume of a borehole. That means 90% of the expenses are poured into volume and property maintenance of the additionally concocted 90% drilling fluids. However, it can give birth to remarkable economic benefits if solids control equipment is promptly adjusted to remove more “harmful solid phase”.

    The efficiency analyses conducted on different equipment show that, theoretically speaking, all of them should have been taken away, but in fact only 80-85% or even lower amount of them have been removed and 90% would have been the best. It is also shown that, by a deeper study into separation capability of various solids control equipment and size distribution in such useful solid phase as barite and harmful solid phase(low-density particles), desander and desilter are not ideal choices to treat barite-weighted drilling fluids, but the decanter centrifuge can decrease the low solid phase gradually accumulated in any type of drilling fluids.

    “Communique on Drilling Fluids Treatment Equipment” well elaborates the standard application methods and analysis approaches of various solids control equipment, for example. drilling fluids shale shaker ought to be analyzed in terms of its solids removal rate, cuttings removal rate and drilling fluids loss ratio; desander, desilter and drilling fluids decanter centrifuge ought to be analyzed in terms of solids removal percentage, low-density solid phase discharge velocity and barite discharge speed; the decanter centrifuge also need to be calculated on its barite recovery percentage, etc.

    Besides, another formula can also work on the calculation of solids control efficiency, such as, if the figures like, dilution volume per unit time, the formation volume and the max. cuttings content got from solid phase analysis are given, we can have the efficiency rate of solids control equipment.

     

  • KOSUN ZJ70 Solids Control System Ordered by ZPEC Delivered on Dec 29th

    READ: On Dec. 29th, KOSUN ZJ70 Solids Control System offered for ZPEC was packed and put into delivery in Yongle Circulating System Factory. It has already been ordered by the end of September.

    On Dec. 29th, KOSUN ZJ70 Solids Control System offered for ZPEC was packed and put into delivery in Yongle Circulating System Factory. It has already been ordered by the end of September.

     

    Delivery site
    Delivery site

    Headquartered in Lujiazui Finance & Trade Zone of Shanghai, Zhongman Petroleum and Natural Gas Group Co., Ltd. ( ZPEC ) is an oil & gas enterprise aiming to set up a multi-national energy company. Its main business scope contains oil drilling rig & equipment production, drilling engineering services, geologic examination, international trade, petroleum and natural gas exploration & development, construction of vehicle natural gas filling stations, technical services, etc.

     

    Packing site
    Packing site
      
    Equipment ready to leave
    Equipment ready to leave
     
    Delivery site
    Delivery site

     

  • KOSUN Products to Display on Beijing CIPPE 2014

    READ: Again, Xi’an KOSUN Machinery Co., Ltd. is about to participate in CIPPE in 2014 with its exhibition area covering 350 m²; and its stand number to be E2160.

    Again, Xi’an KOSUN Machinery Co., Ltd. is about to participate in CIPPE in 2014 with its exhibition area covering 350 m²; and its stand number to be E2160.

     
     

    CIPPE, as a regular meeting of the international petroleum and petrochemical industry, is the high-quality exhibition verified by the Union of international Fairs, that is UFI for short and is held in Beiing in Spring and in Shanghai in Autumn.

    Xi’an KOSUN Machinery Co., Ltd., “KOSUN” for short, was originally named as Xi’an Changqing Drilling Equipment Factory and Xi’an KOSUN Oil Drilling Equipment Co., Ltd.. KOSUN is mainly capable of producing such four series as oil & gas drilling solids control equipment, centrifuges, drilling waste treatment equipment and drilling security equipment, including 25 categories of products, and can also customize packaged design and matching products of oil & gas drilling rigs for drilling contractors. The products provided by KOSUN are extensively used in oil & gas drilling and workover, coalbed methane drilling, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, municipal environment-friendly sewage treatment, industrial wastewater treatment, fruit juice purification, waste oil recovery and purification treatment, etc.

     

  • Three of the Five Sets of KOSUN Solids Control System Offered for Yantai Jereh to Be Delivered Soon

    On Dec 20th, two sets of KOSUN Solids Control Systems delivered to Yantai Jereh were being packed and loaded in KOSUN Jingwei Solids Control System Factory, meantime, another set was also in the process of being packed in KOSUN Yongle Oil Drilling Circulating System Factory. According to the Sales Department, KOSUN offered totally five sets of solids control systems to Yantai Jereh, three among which were about to be sent soon.

     

    This is the solids control system to be sent to Yantai Jereh Oilfield Services Group
    This is the solids control system to be sent to Yantai Jereh Oilfield Services Group
     

    It is reported that Xi’an KOSUN Machinery Co., Ltd. and Yantai Jereh Oilfield Services Group have reached the agreement and signed the contract about five sets of solids control systems at the end of September.

     
    On Dec 20th, to-be-delivered solids control system is being packed. The workman is labeling the equipment.
    On Dec 20th, to-be-delivered solids control system is being packed. The workman is labeling the equipment.
     

    Located in Yantai China, Yantai Jereh Oilfield Services Group is mainly capable of the production completion well drilling equipment; production of natural gas purification, transportation, liquefaction, injection equipment as well as oilfield engineering technique services and construction services, and is quite renowned for its portfolio of solutions on complete oilfield equipment.

     
    This is the ordered desander by Yantai Jereh.
    This is the ordered desander by Yantai Jereh.
     
     
    Two workers are packing the desander.
    Two workers are packing the desander.
     
     
    Workers are covering the plastic tightly on equipment in order to prevent it from the moisture.
    Workers are covering the plastic tightly on equipment in order to prevent it from the moisture.
     
     
    Workers are packing the guard rails of solids control system.
    Workers are packing the guard rails of solids control system.
     
     
    Final check before delivery
    Final check before delivery
     
     
    This is the delivery and packing site of the five sets of solids control systems for Yantai Jereh.
    This is the delivery and packing site of the five sets of solids control systems for Yantai Jereh.
     
     

     

  • KOSUN Cup Basketball & Badminton Game Successfully Ends

    On Dec 14th, the 1st KOSUN Cup Basketball & Badminton Game opened the prelude in Shui’an Garden Stadium located in Jingwei New District, which congregated participants from KOSUN’s office in Gaoxin District, Jingwei Solids Control Equipment Factory and Yongle Solids Control Equipment Factory.

     

    Group photo of players, the foreign client and the company leadership
    Group photo of players, the foreign client and the company leadership

    “The 1st KOSUN Cup Basketball Friendly” blew its starting whistle at 10 a.m. when Gaoxin Office Team and Factory League began to go head to head in Shui’an Garden Stadium. Though it was in the depth of cold winter outside, it was going ahead at full steam inside, with both team fighting physically sometimes by a cute pass and sometimes by a wonderful perimeter shot, passing the basketball flexibly and rapidly via the hands and basket. At last, Gaoxin Office Team outclassed Factory League at 55-40 in the game.

     

    Group photo of basketball players
    Group photo of basketball players

    Besides, the visiting European client who came for negotiation on cooperation in KOSUN’s factory also had the chance to watch the game and to take the group photos with the players.

     

    Game
    Game

    In the afternoon, it was the turn for KOSUN’s “I AM KING OF BADMINTON” game to begin. 8 players competed fiercely with each other in the Stadium and 3 of them won over the others.

     

    Badminton game
    Badminton game

    KOSUN held the game for the purpose of enriching staff’s cultural life. It truely enhanced the partnership among staff via collaboration and communication in the game and practised their teamwork capability.

     

    Game
    Game
     
    Game
    Game
     
    Group photo of badminton players
    Group photo of badminton players

     

  • KOSUN Passes ISO14001 Environmental Management System and OHSAS18001 Occupation Health Safety Management System Certification Audit

    READ: On Dec 13th, KOSUN smoothly passed the in-situ auditing of ISO14001 Environmental Management System and OHSAS18001 Occupation Health Safety Management System Certification conducted by Baer International Certification Center. This meant that Xi’an KOSUN Machinery Co., Ltd. has got the “Green Permit” into international market.

    On Dec 13th, KOSUN smoothly passed the in-situ auditing of ISO14001 Environmental Management System and OHSAS18001 Occupation Health Safety Management System Certification conducted by Baer International Certification Center. This meant that Xi’an KOSUN Machinery Co., Ltd. has got the “Green Permit” into international market.

    ISO14001, called ISO14001 Environmental Management System Certification in full, mainly defines the conformity assessment performed by a third-party certification organization based on ISO14001 standards. It is the standards issued by International Standardization Organization and subject to ISO14000 standard family. It was originally issued in 1996 for the first time and was reviewed by ISO ( International Standardization Organization ) in 2004. Its newest version is ISO14001-2004.

    Certificate of ISO14001
    Certificate of ISO14001 Environmental Management System

    ISO14001 can be used in any organization, including enterprises, institutions and relative government units, to prove that its management has reached the international level, to serve as an assurance of its processes, products and control of various contaminants complying with relevant requirements and to help it set up a good company profile in society. KOSUN’s success on ISO14001 standard auditing can effectively build up its image, raise its visibility and help itself get the “Green Permit” into international market.

    Certificate of OHSAS18001 Occupation Health Safety Management System
    Certificate of OHSAS18001 Occupation Health Safety Management System

    Occupation Health Safety Management System ( OGSMS for short ) is the modern safe production management mode starting up worldwide in late 1980s and is called “post-industrialized management method” together with ISO9000, ISO14000, etc. Occupation Health Safety Management System was mainly derived from the requirements put on the enterprise development. Enlargement of enterprise scale and the increase of production intensification resulted in higher requirements on enterprise quality management and business mode. Therefore, entgerprises should adopt modernized management mode to make all the production and operation activities including safe production management scientific, standardized and institutionalized.

    Occupation Health Safety Management System serves as a scientific and effective management method to improve enterprises’ operational health and safety achievements. It is quite useful in facilitating the implementation of operational safety regulations and systems, in turning the mandated operational health and safety management voluntary and in increasing the level of operational health and safety management. Besides, it is also very helpful to offset the direct or indirect economic benefits brought about by trade barriers. KOSUN’s success to get OHSAS18001 Certification from Baer International Certification Center signifies a worldwide recognition of its brand image and management level.

     

  • KOSUN Monthly Online Now

    On Nov 28th, KOSUN’s first monthly was finally put online after one-month group discussion and efforts as well as emendations done by the technique team, art designing team, graphic designing team and editing team of EC Department.

    Right after the announcement, EC Department immediately set up a project team extending to the members from technique team, art designing team, graphic designing team and editing team. When the project scheme and timetable were agreed unanimously, they soon embarked upon their own part of assignments like, website designing, material collection, code writing, etc. Their pursuit of high quality and precision resulted in tremendous researches done on similiar web monthly, aimed at drawing on the strong points of others to make up for one’s own weak points, and a couple of round table discussion meetings for gathering different but as valuable proposals.

     

    KOSUN’s First Monthly Cover
    KOSUN’s First Monthly Cover
     

    By the end of November, after several rounds of reviews, the monthly has been proved ready to get online, with its overal color as diamond blue and the contents displaying Xi’an KOSUN Machinery Co., Ltd. from all dimensions.

    I mainly centers on KOSUN’s establishment, development, successful customer cases and team capability. A delicately made video tells the story of KOSUN for all these 21 years ever since the year of 1992, when it was established by Mr. Geng Zhonghou in Xi’an China. Downwards is a list of landmarks collected from its developmental experience. Then you will get a full picture about what KOSUN has developed to be by its products exhibition, successful cases, illustration of its production and marketing process, sales network map, powerful KOSUN team pics display as well as its certificates.

    In the future, KOSUN will issue its monthly on a regular basis for the purpose of a full demonstration of itself to the world.

     

  • KOSUN New Staff Sucessfully Graduate from Outward Bound School

    On the afternoon of Nov 28th, a 50-people bus took a group of trainees to Qingxin Yard Outward Bound School where they would go through tough training programmes for the next two days. They were recently recruited staff from Xi’an KOSUN Machinery Co., Ltd..

    After several-month adjustment to the new working environment, the new-comers were given the chance to be more acquainted mutually. The company decided to organize a two-day Outward Bound at the end of November at the foot of Qing Ranges in order to enhance bi- and multi-lateral communication among staff and to teach them team work spirit.

    Outward Bound is also called Experiential Learning. The name derives from a nautical expression that refers to the moment a ship leaves the pier, it will set out for unexpected journey therein many challenges will occur to it. Generally, Outward Bound programs aim to foster the personal growth and social skills of participants by using challenging expeditions in the outdoors.

    These days turned out to be ever unforgettable and meaning since the staff not only have tossed a ball 300 times by a huge drum controlled by almost 20 people via strings, but also have tried walking on 3-cm-diameter steel wire hanging 8 meters high hand in hand with another person, whose degree of difficulty stunned every one at first but later was surmounted by collective efforts of team. They learnt to obey, they learnt to cooperate, and they were taught to serve and help. 

     

    Group photo of newly-established team
    Group photo of newly-established team
     
     
    Everyone is having their breakfast
    Everyone is having their breakfast
     
     
    Tossing the ball with the drum altogether
    Tossing the ball with the drum altogether
     
     
    Jumping across the gap
    Jumping across the gap
     
    KOSUN, as the leading enterprise in China’s solids control industry, has always attached great significance to training its employees, offering its staff both the preliminary training on corporate background, products information and service systems and the more professional theme training organized on a regular basis about relative businesses. Besides, if necessary, KOSUN would also designate certain staff to participate in expensive external drills paid by company. 
     
     
    Running through the bridge
    Running through the bridge
     
     
    Smiles of success on top of the ladders
    Smiles of success on top of the ladders
     
     
    We have surmounted all and graduated!!!
    We have surmounted all and graduated!!!
     

    With specialized career guidances from very well qualified HR experts on staff’s future development and career orientation, KOSUN has formed an excellent group of back-up force for future business expansion worldwide and has really made another huge stride to realization of the win-win situation between staff and company.

     

  • Mid-East Client Visits KOSUN Factory and Reaches Agreement

    READ: On Oct 28th , representative of a globally-renowned Middle-Eastern oil company came for an one-day inspection visit in KOSUN factory on its invitation and reached a positive agreement on product cooperation with KOSUN.

    On Oct 28th, representative of a globally-renowned Middle-Eastern oil company came for an one-day inspection visit in KOSUN factory on its invitation and reached a positive agreement on product cooperation with KOSUN.

     

    Middle-Eastern Clients Visiting KOSUN Factory
    Middle-Eastern Clients Visiting KOSUN Factory
     

    During the visit, the Middle-Eastern client had a thourough inspection in KOSUN factory about its capability, technological prowess, R&D ability, sales team, after-sale services and so on. Through inspection and communication, the Middle-Eastern client took a heavy interest in KOSUN and finally decided to make KOSUN her company’s qualified supplier.

    This time, the Middle-Eastern client made the final decision of two sets of DC 355 Variable Frequency Centrifuge and talked about the basic technical details of the bulk centrifuges and system for next year.

    The Middle-East Region has always been an important partner overseas ever since KOSUN obtained the right to operate import and export trade in 2007. In 2012, in order to further strengthern Middle-East market and provide rapid sale and after-sale services, KOSUN Kazakhstan Solids Control Factory was successfully completed in Aktobe and put into service, whose establishment greatly enhanced its expansion in Middle-East Region.

    It will be another successful advancement during KOSUN’s expansion in Middle-East market that the client from the renowned Middle-Eastern drilling company came to visit KOSUN and reached an agreement on cooperation, which is of great significance for KOSUN to cement the Middle-East market.

     

  • KOSUN ZJ50 Drilling Solids Control System Passes European Guest Acceptance

    On Nov 14th, KOSUN ZJ50 Drilling Solids Control System supported to some European drilling company passed the acceptance of clients. As planned, the system is supposed to be delivered by truck to European drilling worksite by the end of November.

    European Clients Coming for Product Acceptance
    European Clients Coming for Product Acceptance
     
    ZJ50 Drilling Solids Control System which contains two LS833 Shale Shakers, two Decanter Centrifuges, a Mud Cleaner, a Vaccum Degasser and six Mud Tankers, is all painted orange.
    Group Photo of Clients and KOSUN staff
    Group Photo of Clients and KOSUN Staff
     

    This system has been ordered from KOSUN at the end of August by European clients. Before that, they consecutively contacted several Chinese and foreign solids control factories with the demands for CE certificate and ATEX certificate. After communications and comparisons, KOSUN finally beat the others in terms of product quality and price and won the order.

    Clients Visiting KOSUN Factory
    Clients Visiting KOSUN Factory
     

    This time, the success on ZJ50 Drilling Solids Control System signifies KOSUN’s another successful expansion in EU market.

     

    Clients Checking Equipment on Factory Worksite
    Clients Checking Equipment on Factory Worksite
     
     
    ZJ50 Solids Control Equipment
    ZJ50 Solids Control Equipment