分类: KOSUN News

KOSUN exclusively manufacture solids control equipment,solids control system,mud recycling system,drilling waste management equipment,etc.Contact us N

  • KOSUN River Dredging Process Design

    At present, China's river dredging is becoming more and more serious, the original river water regulation and flood control disaster prevention function is reduced, the government have paid a sufficient attention to river dredging and has been made a target to development Ecological Water Conservancy.

    river dredging process design

    What is the current river dredging technology?
    1.Draining dredging:
    For the less functional river, you can build temporary cofferdam in the river construction section, and after the river water drain,it can be divided into dry dredging and hydraulic dredging.
    2.Underwater dredging:
    Underwater dredging is to put the dredging equipment on the ship, taking the dredging ship as a construction platform, the surface of the operation of the dredging equipment will be sludge excavation, transported by the pipeline to the shore yard. Underwater dredging has the following methods.
    -grapple dredging
    -pumping dredging
    -ordinary cutter suction dredging
    – bucket wheel dredging
    3.Environmental dredging:
    a.Water quality improved environmental dredging
    b. In the construction of the dredging river when the water as much as possible to avoid pollution.

    KOSUN is a solid-liquid separation expert with more than 20 years experience and oil field environmental protection company, we can not only provide river dredging process design,but also provides sludge dewatering equipment, tailings treatment equipment, mud separation equipment and so on. (Editor:Kosun Lily.Wang)

  • KOSUN Vertical Cutting Dryers Sending to Xinjiang

    Recently, numbers of KOSUN Vertical Cutting Dryers have been sent to Xinjiang Karamay oil sludge management center.

    Kosun vertical cuttings dryer for oil-based mud, by centrifugal separation principle, can effectively recover the cuttings in liquid phase composition, the solid phase becomes very dry, the drilling mud in the recovery, reduce the cost of drilling operation, but also reduces the the pollution of the environment, in accordance with international emission standards and environmental protection requirements. It can be used for drilling cuttings in land and ocean drilling.


    vertical cutting dryer

    Advantages of KOSUN Vertical Cutting Dryer:

    1 Efficient solid-liquid separation, the effective recovery of the mud in the drilling cuttings, a substantial reduction in solid emissions, solid oil content can be achieved after treatment of less than 5%

    2 Effective recovery and reuse in the mud, mud circulation system, Recyclable due to slurry leakage, mobile derrick and mesh plug loss shaker.

    3 Commonly used wear parts can be replaced from the top of the device; no need to move any device, you can replace the belt.

    4 In the 4 rotation scraper Sprayed Tungsten Carbide corrosion resistant material, can prolong the service life, reduce maintenance costs.

    5 suitable for oil base mud drilling cuttings recovery

    6 to achieve the mud does not fall on the job requirements, reduce drilling fluid costs and waste disposal costs.
     

    Know more information about KOSUN Vertical Cutting Dryer:

    http://www.kosun.com/products/drilling-waste-management/vertical-cuttings-dryer.html
    (Editor:Kosun Lily.Wang)

  • LS584-D Hi-G Drying Shaker

    Hi-G Drying Shaker is a kind of equipment of drilling waste management system, and is used to separate drilling fluid from cuttings treated by solids control equipment.

    It features in two advantages:
    1.It reduces total cuttings discharge amount, discharge cost and environmental pollution;
    2.The recovered drilling fluid can be recycled, which reduces the cost of drilling fluid.


    drying shaker

    KOSUN LS584-D Hi-G Drying Shaker is a high frequency linear-motion vibrating screen machine, equipped with four screen panels and two vibrating motors, and offering a choice of manually adjusting screen frame angle while drilling (AWD). When LS584-D Hi-G Drying Shaker works, the screen frame angle can be adjusted from -1° to +5° by dint of its structural design innovation.

    LS584-D Hi-G Drying Shaker can separate drilling fluid from cuttings efficiently. Fix vibrating motors onto the screen frame with a high-strength supporting seat, and position them on the screen box, and the positioning in this way can make vibrating motors directly exert G-forces on screens. The isolation mounts can protect the bedframe from vibration effect of the screen frame. Cuttings are fed into a hopper at the tail of screen box of LS584-D dryer by a conveying device.

    Field-proven tensioning system is of stable performance and reliable structure. It takes less than two minutes for a person to install or remove one screen using special tools. (Editor:Kosun Lily.Wang)

  • Drilling Waste Treatment and Disposal Equipment

    Drilling Waste Treatment and Disposal Equipment:
    Oilfield environmental Drilling Waste Treatment and Disposal Equipment usually contains drying shaker, vertical cuttings dryer, decanter centrifuge, screw pump,  screw conveyor, etc those can be used for the mud dry processing such as solids control equipment.


    drilling waste treatment

    Kosun, from China, are searching drilling waste treatment and disposal methods for 25 years,  manufacturing quality drilling mud  waste management system and serving the clients around the world.

    Drilling Waste treatment and Disposal Principle:
    Drilling Waste treatment and Cutting Dryer is to control the volume of water containing in the drilling mud and stabilize the liquid performance, which achieves the purpose of managing the drilling waste and recycle the drilling mud without damaging the water performance.


    drilling waste treatment equipment

    This drilling waste treatment and cutting dryer system realizes the social value of environmental protection, maximizing the usage of drilling fluid economically. It overwhelmingly overcomes the difficulty in disposing the waste all or disposing them effectively, which combines the technology brought from Italy with advantages of the same products abroad. At present, It has been used widely by foreign customers in the field of environmental drilling waste treatment and gained a wide range of praise.

    Click and Know more information about drilling waste treatment Equipment:
    http://www.kosuneco.com/category-80.html
    http://www.kosun.com/products/drilling-waste-management/
    http://hankoresources.com/

  • KOSUN LS Shale Shaker Sending to Xinjiang

    Founded in 1992, KOSUN is based on the Chinese market to provide worldwide users with all kinds of professional solid-liquid separation products and comprehensive treatment services. KOSUN is one of the best Shale Shaker manufacturers in China and is well-known in the domestic and international.


    Shale Shaker manufacturers

    Recently, KOSUN and a oil company  in Xinjiang reached a cooperation agreement, they ordered our linear dual shale shakers used in large oil rigs, after several months research and produce, the shale shakers are now ready to send to Xinjiang.

    KOSUN linear motion shale shaker is especially effective while  drilling top-hole sections where heavy and high-volume solids are usually  encountered. In these intervals,shakers may generate powerful G-forces and its effective vibrating motion can quickly remove the dense solids  from screens and particles from wells.


    Shale Shakers

    Features and Benefits of  linear motion shale shaker:
    -G-forces linear motion up to 7.4 G(adjustable depending on the situation)
    -Hi-speed conveyance of cuttings
    -Higher shaker-fluids capacity
    -Able to process heavier solids loads
    -Enhances cuttings processing volume
    -AWD device from  -1°-5°
    -Single side screens tension system to easily change the screens
    -Shaker feeder can be weir type and header box
    -Hook-strip screens can be PMD and PWP screens

    Xi’an KOSUN Machinery Co., Ltd. (KOSUN) is a state-level high-tech enterprise integrating environmental products R&D, production and sales, general project contracting and environmental management services.Now, KOSUN mianly research and development products are sludge treatment equipment, tailings treatment equipment , river dredging equipment. KOSUN solids control equipment can be used in oilfield environmental protection industry, environmental sludge treatment, soil repair, piling mud treatment, shield mud separation, non-excavation mud separation and other fields, multi-industry construction. (Editor:Kosun Lily.Wang)

  • Tailings Management Process Design

    In recent years,protecting the environment is becoming more and more important to the whole human beings.How to properly management the tailings has been a primary problem for the mining business with the government increased environmental protection efforts.


    tailings management process figure

     
    The following is the commonly tailings management process design and method:
     
    After the tailings went into the tailings pool, using the pump made it into the mud cleaner, this divided into two parts:
     
    1. The underflow from the desilter falls onto filter press or fine-screen shaker for dewatering, and dried solids are recycled.
     
    2. The overflow from the desilter is separated by centrifuge into liquid and solids, and the liquid is recycled and the solids are dried for recycling.

    tailings management process plan
     
    Need more information about tailings management process design,please contact us!(Editor:Kosun Lily.Wang)

  • The Selection of Shale Shaker Screen Sizes

    Shale shaker screen sizes selection is based on original shaker screen size. Such as the overall dimension. Shaker screen dimension, usually means the overall size of screen panel. If the screen is framed one, dimension include length, width, height or thickness. If the screen is hook strip, dimension means the length, width, and hook height or hook size.


    Shale Shaker Screen

    Besides screen overall size, there are detail size on screen panels. Such as holes shape and size. The screen cloth mesh size. Effective screen area, the non blanked area, and so on.Users should also consider the certain drilling condition or mud property. The main function or achievement we need.

    Shale Shaker Screen is wear part of the shale shaker, mainly classified into soft sieve screen, sieve plate type screen,and frame plate type screen.Product characteristics are wear resistance, wearability, rating of temperature, low cost, easy disassembly, conductivity ( powder ) liquid, good trapping ( dreg ) effect, etc.


    shaker screen

    The popular shale shaker screen sizes including 700x1050mm, 630x1250mm, 585x1165mm, 710x1250mm, and so on. Mesh sizes for oilfield solids control shaker are usually from API 40-API325.

    Almost shaker screen demand is the replacement shaker screen for present shaker. Screens replacement should be completely interchangeable with original or existing one. If user are not sure about screen mesh size or API size selection. Please toward to mud engineer, shaker screen manufacturer. Take their suggestion as reference or guidance. (Editor:Kosun Lily.Wang)

  • KOSUN Bid in the field of Hazardous Waste Treatment Successful

    Recently, good news was came from the Karamay hazardous waste disposal center that KOSUN bid in Xinjiang Karamay Chemical Industrial Park sludge reduction core equipment, KOSUN provide hazardous waste reduction processing equipment. This is the second bid that docking hazardous waste disposal field after the Daqing Oilfield project, also this is the first time use KOSUN vertical centrifuges which capacity is 60 tons per hour  in hazardous waste disposal center in the domestic.

    Hazardous Waste Treatment

    KOSUN as the world's leading manufacturer of waste treatment equipment and system, through nearly 20 years of continuous development,KOSUN enjoyed a high reputation in the international market, and in many oil areas have long-term cooperation projects. The continuous improvement of company hardware and software in waste treatment provide more adequate protection for customers who choose KOSUN waste treatment equipment and system.


    waste treatment equipment

    Founded in 1992, Xi’an KOSUN Machinery Co., Ltd. (KOSUN) is a state-level high-tech enterprise integrating environmental products R&D, production and sales, general project contracting and environmental management services. KOSUN is committed to the quality policy of “Good Faith, Quality Goods and Transcendence” and is based on the Chinese market to provide worldwide users with all kinds of professional solid-liquid separation products and comprehensive treatment services.

    Need more information about waste treatment equipment and system:http://www.kosun.com/products/drilling-waste-management/ (Editor:Kosun Lily.Wang)

  • Drilling Waste Management Equipment-KOSUN

    Drilling waste management, in many parts of the world, are probably the biggest challenge facing the industry today. To meet the environmental compliance, stringent limitations concerning the discharge of Non-Aqueous Fluid (NAF) contaminated drill cuttings to the environment have been addressed by governments. To comply with these requirements, specialized technology has been developed to further treat the drill cuttings after the normal Solids Control Equipment.


    Drilling Waste Management

    About Drill Waste Management Equipment,KOSUN offer the Vertical Cuttings Dryer, High Speed Decanter Centrifuge, Screw Conveyor, Mud agitator,Screw Pumps, Mud Tanks that utilized for oilfield drilling waste management system, drilling cuttings disposal plant etc. A rich experience of world-wide sales and operation allows us to make the equipment  and system according to your local requirements from mechanical structure to electrical system, no matter the US, EU, Middle East or Austria, Africa.


    Drill Waste Management

    Vertical Cuttings Dryer can effectively recover the cuttings in liquid phase composition, the solid phase becomes very dry, the drilling mud in the recovery, reduce the cost of drilling operation, but also reduces the the pollution of the environment, in accordance with international emission standards and environmental protection requirements. It can be used for drilling cuttings in land and ocean drilling.With the continuous improvement of environmental protection requirements, the major oil fields are faced with the problem of drilling waste disposal.

    High Speed Decanter Centrifuge is used in separating suspension of solids phase with particle ≥2μm in diameter, and can be used at Environmental Protection Industry, Chemical Industry, Food Industry, Pharmaceutical Industry,and many other related industries, and can the replacement of GEA westfalia centrifuges or Alfa Laval centrifuge.

    Screw conveyor (Auger)can be used in drilling waste management projects, providing an effective and low-cost drilling cuttings transport system for offshore and onshore drilling rigs. Adopting a multi-sectional composite structure with each section of 12 feet (3.66m), the screw conveyor can be flexibly assembled on different drilling sites, with characteristics of simple operation, stable structure, strong adaptability and high safety, significantly improving the operating efficiency of equipment and reducing the cost and resources. The flights of screw conveyer adopt wear-resistant material to ensure its service life.

    Mud agitator mainly used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fluids.

    More information About Drill Waste Management Equipment: http://www.kosun.com/products/drilling-waste-management/ (Editor:Kosun Lily.Wang)

  • What’s the meaning of the model of a decanter centrifuge?

    The model of a decanter centrifuge represents the following meanings: For example, LW450*842, a model of decanter centrifuge, among which L means Luoxuan in Chinese Pinyin, W means Woshi in Chinese Pinyin, 450 means the bowl diameter of decanter centrifuge, and 842 means the bowl length of decanter centrifuge.


    Decanter Centrifuge
     

    A suitable model of decanter centrifuge can not only solve production problems and improve work efficiency, but also save production cost and reduce business risks. Several main factors that determine the centrifuge model are as follows:

    1. Speed of decanter centrifuge: The speed of a common decanter centrifuge is more than 2000RPM. For some materials hard to separate, a higher speed is required. The higher the speed is, the higher the separation factor of centrifuge, the better the separation effect.

    2. Material of decanter centrifuge: PH value of materials to be treated determines the bowl material of decanter centrifuge. Different materials have diverse physical and chemical indexes in their abrasion and corrosion resistances. Overseas decanter centrifuges are generally made of 316L or duplex stainless steel, with wear parts made of ceramic materials.

    3. Differential control of decanter centrifuge: Different differentials have different control accuracies, service lives and maintenance costs. The higher its differential accuracy is, the better its adaptation to materials is. So it is advisable to select equipment with a high differential accuracy.

    4. Length-diameter ratio: The bigger the length-diameter ratio of decanter centrifuge is, the higher the handling capacity is, the lower the moisture content is.

    5. Control system: At present, almost all of equipment manufacturers at home and abroad have achieved a full automatic control over the equipment.

    6. Installed power: As for a control over energy consumption, generally speaking, domestic equipment has a higher energy consumption ratio, while foreign equipment has a lower one.

    7. Manufacturing technique: Since a decanter centrifuge is a kind of separation equipment with high precision machining requirements, the centrifuges manufactured by enterprises without a precision machining capability will suffer from a high maintenance ratio and a restricted handling capacity. (Editor:Kosun Lily.Wang)