KOSUN

博客

  • What Are Desilter and Desander

    Desilter and desander are used to process large volumes of drilling fluid to remove abrasive sands and silts that shale shakers cannot remove.

    KOSUN’s desilting and desanding hydrocyclones are made from high density abrasion resistant polyurethane. The unique internal manifold design minimises the back pressure on hydrocyclones and maximises the solids removal. Fine tuning is achieved through adjustable orifice openings at the discharge point on the cone.

    What is the desilter and desander

    Both desilter and desander are available in a large range of configurations including standing alone, over a shaker as a mud cleaner or packaged with a supply pump as a mobile desilting unit. Please contact your nearest KOSUN office to discuss about applications and appropriate technical specifications.

    KOSUN is a leader in China’s solids control industry and expert in drilling waste management. KOSUN is capable of providing customers with such four series as oil & gas drilling solids control equipment, centrifuges, drilling waste treatment equipment and drilling security equipment, including 25 categories of products, and can also customize packaged design and matching products of oil & gas drilling rigs for drilling contractors. The products provided by KOSUN are extensively used in oil & gas drilling and workover, coalbed methane drilling, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, municipal environment-friendly sewage treatment, industrial wastewater treatment, fruit juice purification, waste oil recovery and purification treatment, etc.

  • KOSUN Submersible Slurry Pump Product Overview

    Product Overview of KOSUN Submersible Slurry Pump 

    1. Application Scope of KOSUN Submersible Slurry Pump 

    LSP Submersible Slurry Pump is one of the key equipment in water treatment process. This series of product applies to circumstances that require mixing and flow of solid-liquid two-phase flow and solid-liquid-gas three-phase flow homogeneity during biochemical process. 

    KOSUN submersible slurry pump product overview

    2. Working Conditions of KOSUN Oilfield Drilling Submersible Slurry Pump 

        Maximum medium temperature cannot exceed 40oC;

        Medium pH is within 5-9;

        Liquid density cannot exceed 1150kg/m³;

        Submersible depth cannot exceed 20m for operation;

        Entanglement and flotage are not allowed in the medium.

        The pump should be in underwater completely for operation. Operation in flammable and explosive or corrosive liquid is not allowed!

    3. Structure and Function of KOSUN Submersible Slurry Pump 

        Submersible slurry pump system consists of main machine, installation system, electric cabinet, etc. It is of direct connection structure with advantages as concise structure, low energy consumption and easy maintenance, as well as fair functions of large axial thrust and self cleaning to prevent entanglement.

  • KOSUN Black Rhino Shale Shaker to Display at 2014 CIPPE

    READ: KOSUN Shale Shaker issued in 2013 is about to show up at CIPPE this year.

    When another Spring comes, the Capital turns into hustle and bustle busy with continuous events. International petrochemical event—China International Petroleum Petrochemical Technology and Equipment Exhibition(Beijing CIPPE for short) is following the high-profile two sessions to open in Beijing, where domestic and foreign relevant enterprises will gather together in pursuit of new business opportunities. Frequent exhibitor—Xi’an KOSUN Machinery Co., Ltd. is about to show up and now still in its last preparatory stage.

    It is reported that KOSUN Shale Shaker issued in 2013 is about to show up at CIPPE this year.

    As a commonplace screening machine in industrial mining companies, shale shaker screens, classifies, washes, sculps and dewaters the materials. Technical effects, manufacture efficiency, energy saving and, consequently, economic benefits are reliant on screening machine’s technology level and quality. Due to its simplicity, large capacity and reliability, shale shaker has had an absolute head start and accounted for 95% shares in the market.

    Catering to the global demands, Black Rhino Linear Shale Shaker has been produced with choicest materials and latest techniques and been bestowed with such features as better efficiency, simple maintenance, more flexible configuration from function modularization, etc.

    Large capacity makes dual unit as efficienct as the triple one.

    By Martin Vibrating Motor with powerful G-force, Black Rhino Shale Shakers can produce significant improvement on the capacity and cuttings dryness. They averagely handle 600-750 GPM per hour for 9-10ppg-dense mud and 140 meshes. Dual unit is efficient as conventional triple unit. Under the same circumstances, its large capacity decreases the amount needed and cost.

    Function modulization produces dryer oil-based cuttings.

    Besides, Black Rhino Shale Shaker has also modulized their functions. As the bottom shaker for cleaners, it brings big economic benefits from valuable drilling fluids for its excellent performance on reducing lost mud from below cyclones.

    Also, as an independent dryer shaker, Black Rhino Shale Shaker is effective when oil-based cuttings is handled. It is proved that its further treated oil-based cuttings contains less 10% of oil content, which accords with requirements for completion well waste treatment.

    With strong adaptability, it can serve for over 8 years.

    KOSUN Black Rhino Shale Shaker fully considered all the possible drilling conditions from choosing to forging parts materials, and were fully prepared to resist heat, freeze and corrosion. It is not only reliable, but also is environmentally acceptable. It can serve for over 8 years.

    Black Rhino Shale Shaker adopts AWD Angle Adjustment System rather than conventional hydraulic hoist since it can adjust between -1°～5° by mere moves of handle without halting the machine and it is convenient for its practical control of treatment effects. Except for this, it is equipped with synchronous adjustment system for both sides, in a bid to reduce enormous lost mud. Black Rhino Shale Shaker has also got a better sliding displacement structure than the common one.

     

  • 2014 Beijing CIPPE Countdown

    The Company, in recent years, has shown up on several domestic and foreign exhibitions at their invitations, securing heavy order book at the same time. Here are a list of snapshots taken these years on Beijing CIPPE.

    Group photo of KOSUN’s exhibiters at the Exhibition
    Group photo of KOSUN’s exhibiters at the Exhibition 
     
    Group photo of KOSUN’s overal staff at the Exhibition in 2013
    Group photo of KOSUN’s overal staff at the Exhibition in 2013
     

    Again, Xi’an KOSUN Machinery Co., Ltd. is about to participate in CIPPE in 2014 with its exhibition area covering 350 m²; and its stand number to be E2160.

    CIPPE, as a regular meeting of the international petroleum and petrochemical industry, is the high-quality exhibition verified by the Union of international Fairs, that is UFI for short and is held in Beiing in Spring and in Shanghai in Autumn.

    Xi’an KOSUN Machinery Co., Ltd., “KOSUN” for short, was originally named as Xi’an Changqing Drilling Equipment Factory and Xi’an KOSUN Oil Drilling Equipment Co., Ltd.. KOSUN is mainly capable of producing such four series as oil & gas drilling solids control equipment, centrifuges, drilling waste treatment equipment and drilling security equipment, including 25 categories of products, and can also customize packaged design and matching products of oil & gas drilling rigs for drilling contractors. The products provided by KOSUN are extensively used in oil & gas drilling and workover, coalbed methane drilling, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, municipal environment-friendly sewage treatment, industrial wastewater treatment, fruit juice purification, waste oil recovery and purification treatment, etc.

     

  • Common Ways to Adjust Water-based Mud Density

    READ: Water-based mud is a generic term of versatile circulating liquids satisfying different drilling requirements in exploration efforts. It is proper to apply solids control system against harmful solids and to get down nud density by input of additives or lower-density mud from identical system, etc.

    Water-based mud is a generic term of versatile circulating liquids satisfying different drilling requirements in exploration efforts. It plays a leading role in actual oil drilling operations. In terms of composition, it is a multi-phase dispersed system including bentonite, additives, weighting materials, brine and drill cuttings. In terms of fluid media, it is a drilling fluids with water as continuous fluid media. Water -based mud extends to deep well drilling mud, dispersed drilling mud, calcified drilling mud, brine drilling mud, non-dispersed drilling mud and MMH drilling mud.

    Ways to boost its density:

    1. It is better to remove coarse solids and keep bentonite and solid content within designed limits first.

    2. It is better to evenly inject weighting materials with weighting device along the cycle whose density is best kept between 0.01g/cm3 and 0.04 g/cm3(unless confronted with kick and spill).

    3. It is better to improve mud’s lubricating property with proper amount of lubricant when high-density drilling mud are made denser.

    4. After all, it is better to adjust mud properties within designed limits.

    Adjustment of Water-based Mud Density:

    1. Based on actual operations, it is proper to apply solids control system against harmful solids and to get down nud density by input of additives or lower-density mud from identical system, etc.

    2. It is better to add weighting materials and proportional weighted fluids for boost of mud density. The weighting materials can be barite, iron ore, limestone powder, and so on.

     

  • Drilling fluids screw pump

  • Visit KOSUN at Beijing CIPPE 2014

    READ: Xi’an KOSUN Machinery Co., Ltd.(KOSUN for short) would like to invite you to join them at CIPPE 2014, which is being held from Mar. 19th to 21st at the New China International Exhibition Center in Beijing, with its exhibition area covering 350 m² and its stand number to be E2160.

    Discover Leading-edge Solids Control & Waste Treatment Technologies in KOSUN and CIPPE!

    Xi’an KOSUN Machinery Co., Ltd.(KOSUN for short) would like to invite you to join them at CIPPE 2014, which is being held from Mar. 19th to 21st at the New China International Exhibition Center in Beijing, with its exhibition area covering 350 m² and its stand number to be E2160.

     

     

    CIPPE, as a regular meeting displaying new trends in international petroleum and petrochemical industry, is the high-quality exhibition verified by the Union of international Fairs, that is UFI for short and is held in Beijing in Spring and in Shanghai in Autumn. At Beijing CIPPE 2014, KOSUN will display a new array of its solids control & waste treatment products.

    Who is KOSUN?

    KOSUN is a leader in domestic solids control industry and expert in waste treatment. Since its establishement in 1992, it has been working on continuous development of solids control and waste treatment technologies. Its sustaining innovative ability have given birth to shale shaker in 1992, desander and desilter in 1993, centrifugal pump in 1994, vacuum degasser in 1997, decanter centrifuge in 1998, low-temperature solids control system in 1998, which was put into direct application in Kazakhstan, Black Rhino portfolio in 2013, rolled out into U.S. market.

    KOSUN has spanned its sales and after-sales services network across the globe, with factories, marketing company and service company in Kazakhstan; stable partnerships and waste management projects in Algeria and Egypt; a subsidiary in North America in 2013 for better product roll-out and services in the market.

    KOSUN mainly targets its products and services to

    Drilling fluids services companies;

    Drilling companies: oil & gas drilling companies, coalbed gas drilling companies, horizontal directional crossing companies, themal drilling companies, water wells drilling companies, mineral exploration companies, piling and shield construction units;

    Rig companies: oil & gas drilling rig companies, coalbed gas and horizontal directional drilling rig manufacture companies or sets sales companies;

    Oil companies;

    Oil & gas services companies;

    Mud tank manufacturers;

    Trading companies, other concerned equipment manufacturer in the industry, etc.

    Through 21-year development, KOSUN has further cemented its status and reputation by strong partnerships with top companies and successes in major influential projects.

    In 2007, KOSUN won the bid for PEXMEX Offshore Oil Drilling Module.

    In 2011, KOSUN awarded the contract with Gazprom – the largest natural gas corporation in the world, on the supporting project of peripheral equipment and all solids control systems for three sets of 3000m truck-mounted drilling rigs.

    In 2012, KOSUN Kazakhstan Solids Control Factory was completed and put into use in Aktobe, Kazakhstan, and KOSUN Service Co., Ltd ( Kazakhstan ). obtained an order of providing low temperature solids control systems for 2 sets of 70D drilling rigs from Sino-KZ GWDC.

    In 2013, KOSUN secured the contract with Sichuan Honghua Oil & Gas Engineering and Technology Services Co., Ltd. under Honghua Group, concerning 7 sets of 2000HP onshore rig mud solids control systems in Xi’an, China.

    In 2013, KOSUN secured the contract of solids control systems with Polish Drilling Company, singalling a substantial step upwards on product quality and services.

    In 2013, American KOSUN Solids Control Equipment Co., Ltd. was established in Houston, Texas, USA, and the brand of Black Rhino was created.

    Recently, KOSUN’s efforts have been better confirmed with consecutive vertifications from API, IADC, CE and ISO9000.

    For the purpose of enhancing the services to overseas customers, KOSUN has set up a marketing company and a services company in Kazakhstan in 2009, acquired stakes of the joint venture in Algeria and then invested in a subsidiary in U.S. in 2013.

    This time, KOSUN will be on stand to discuss your requirements through the event, with its product-savvy experts present, and its Black Rhino Shale Shaker and Vertical Cutting Dryer on display. You are very welcome to visit us at E2160!

     

     

    Contact person: Mr. Toby Wang

    Position: International Business Manager

    Fax: +86-29-8730-4648

    E-mail: sales@adkosun.com

     

  • Charming Women’s Day

  • Advantages of Three-in-one Mud Cleaner

    READ: Three-in-one mud cleaner, a combination of desander, desilter and high efficient shale shaker, can further separate the smaller solid particles left in the mud after primary treatment in shale shaker for a better treatment in the following equipment.

    I. Description of Three-in-one Mud Cleaner’s Functions:

    Three-in-one mud cleaner, a combination of desander, desilter and high efficient shale shaker, can further separate the smaller solid particles left in the mud after primary treatment in shale shaker for a better treatment in the following equipment. MD Mud Cleaner can serve as independent equipment, or as spare equipment in parallel with first-stage solids control equipment–shale shaker by mere application of its underflow shaker.

    Drilling fluids enters from the mud compartment under vacuum degasser into desander via the force of its pump, flows into the compartment under desander after treatment, accesses desilter by mud pump and then goes for further treatment in decanter centrifuge through spillway trough afterwards.

    II. Advantages and Features of KOSUN’s Products:

    1. Hydrocyclones in desander and desilter are both made of wearable materials like PU, high-chromium cast iron or ceramics.

    2. Desander is flexible to work with 1-3 pieces of 10" or 12" cones, each of which has a capacity between 100-120GPM, and is capable to address solids from 45-74μm. While desilter is flexible to work with 8, 10, 12, 16 or 20 pieces of 4" or 5" cones and is capable to segregate solids between 10-44μm.

    3. Angle of the sieve beds can be adjusted manually when it is rolling.

    4. Screens are fixed by hooks for the convenience of replacement.

    5. Compared with single desander or desilter, it effectively saves time and improves treating efficiency.

     

  • Vacuum Degasser