KOSUN

作者： Kosun_com

  • KOSUN Solids Control Equipment for 20 Rigs Is Successively on Its Way to Russia

    At present, KOSUN has signed a contract concerning providing 20 sets of solids control systems and a large number of accessories as well as mud chemicals, and the contract term is two years. The contract of solids control equipment covers 40 LS583 linear shale shakers, 20 MD106 mud cleaners, 20 VD240 vacuum degassers, 20 DC450S centrifuges, 40 CP56-22 centrifugal pumps, 20 CP56-37S centrifugal pumps, 20 G70-1 screw pumps and 20 JM35 jet mud mixers, which is another bulk order won by KOSUN from a well-known Russian drilling corporation, following its cooperation with many famours companies.


    Service Site
     
    KOSUN Customized Shale Shaker
    KOSUN Mini LS583 linear shale shaker is compatible with MI-SWACO screens.
     

    KOSUN Mini LS583 linear shale shaker is compatible with MI-SWACO screens.

    Kosun Mini LS583 linear shale shaker is compatible with MI-SWACO screens.
    KOSUN Mini LS583 linear shale shaker is compatible with MI-SWACO screens.

    This fruitful cooperation is conductive to further increase of KOSUN solids control products in the Russian market share. During the period, the leaders of both parties formally establish the strategic cooperative relationship through repeated close negotiations and in the principle of mutual benefit, win-win and joint development, and plan to set up a warehouse of product accessories in Nefteyugansk by integrating both sides’ advantages, so as to provide a series of localized services of solids control products for numerous Russian drilling companies.

    Several new-type D series of Kosun centrifuges advanced in China are ready for delivery.
    Several new-type D series of KOSUN centrifuges advanced in China are ready for delivery.
     
    Kosun Centrifugal Pumps Specialized for Polar Environment
    KOSUN Centrifugal Pumps Specialized for Polar Environment
     

  • KOSUN Expects to Meet You in Shanghai CIPPE

    The 6th China International Petroleum & Petrochemical Technology and Equipment Exhibition (CIPPE 2014 Shanghai), will take place with China International Offshore Oil & Gas Exhibition (CIOOE) in Shanghai New International Expo Center on August 26-28, 2014. Xi’an KOSUN Machinery Co., Ltd (KOSUN) is about to attend this event and the stand No. is N1912.

     

    cippe 2014 shanghai kosun

    As a specializing manufacturer of solid control equipment and drilling waste management equipment since 1992, KOSUN has been supplying its high quality equipment and exclusive services to many big companies all over the world. Up to now, KOSUN has set up branches in Aktobe, Houston and Moscow, and built partnerships with many companies in North Africa, Middle East, Southeast Asia and Latin America.

    Now days, KOSUN is always trying to attend all these big international exhibitions in oil and gas industry to grasp chances of face to face meetings with clients. According to this kind of meetings, KOSUN people can get in touch with clients more closely, and what’s more important, we can know better which kind of equipment can meet the need of clients, so that we can make some adjustments for our equipments and try to provide better services for our clients. 

    In this coming CIPPE (Shanghai), we hope to receive you there and could have a friendly talk with you then.

    Here are pictures of CIPPE BEIJING 2014 from KOSUN

     

     
     

  • KOSUN Machinery 22nd Team Training Conference

    KOSUN Machinery has been focusing on employees cultivating of the comprehensive integrating skills, by regularly holding various training courses of technology, management, marketing ,etc. KOSUN machinery always devotes to building a versatile marketing team.
     
    solids control training
    To make sure that all the KOSUN marketing staff fully be able of understanding the features and performance of the products, not only to offer the better service to our customers, but also to suit our marketing team to the coming selling season, we held. A three-day training, this training includes new products features and performance, technical parameters, marketing skills, business processes, customer service and so on.
    Technology R & D center director and technical engineers presented our star-products: Black Rhino Ⅱ series of solid control system and the new drilling waste treatment equipment to the marketing staff , and further expounds the features, performance, installation, debugging, repair and operation ,the possible problems and the trouble shooting methods. Technology R & D center also proposed the 2015 new product innovation design, which was communicated actively around the practical problems encountered in the sales process, we talk about feelings, advice, and many problems were solved or find the answer.
     
    drilling waste management training
    KOSUN machinery also invited a senior marketing consulting and training instructors to teach, Professor Gamal analysis deeply and carefully on the current international situation, domestic oil drilling industry , and introduces several well-known company’s successful brand management and marketing model, proposed us to effectively cope with the current development of the industry challenges, develop new products marketing mode, increase market development efforts, establish and improve the evaluation and related system, continue to strengthen research and development capabilities, expand production capacity at the same time, further enhance  customer service quality and service level.
    This training activity greatly motivate the initiatives of the marketing team, marketing personnel of service has been further improved, what`s more, we are now of more clear direction and confidence in the marketing work. This training will not only for the past half-year marketing work summary, but also for the 2014-2015 new marketing strategy.
     

  • A Famous Russian Drilling Company Paid a Visit to KOSUN Jingwei Solids Control Factory

    On June 5th, 2014, the investigation group from a famous Russian drilling company arrived at KOSUN Jingwei Solids Control Factory for in-depth investigation and commercial & technical negotiation lasting two days. Both parties had a profound communication on rig solids control supporting equipment used in the polar regions in the future.

    As a key market under KOSUN’s global layout, Russia owns rich oil and gas resources. And, against the background of previous Sino-Russia cooperation in energy filed, Chinese high-quality solids control equipment will be a pressing need in the coming five years. Russia is becoming an overseas market with the greatest potential for Chinese oil and natural gas drilling equipment manufacturers. KOSUN is making more efforts to develop the Russian market. We will build accessory warehouses in Russia, establish and improve high-level sales team by relying on local cooperative partners, and provide expert-level technical guidance and localized after-sales services to supply customized professional solids control and drilling waste management services for customers.

    KOSUN Jingwei Solids Control Factory

    This Russian drilling service company possesses tens of rigs, being powerful and influential in Russia. With years of brand popularity won by KOSUN in Russian-speaking areas, KOSUN will be a core one whenever Russian drilling companies think of Chinese solids control equipment suppliers.

    KOSUN Jingwei Solids Control Factory

    KOSUN is the first Chinese company that once provided solids control system used in polar conditions for Russian market. In 2009, KOSUN signed a contract with Gazprom, the largest natural gas corporation in the world, on the solids control supporting project for three polar region drilling rigs. During drilling projects in extremely cold winter in the polar regions, high-quality products of KOSUN have repeatedly brought satisfactory application experience to customers.

    KOSUN Jingwei Solids Control Factory

    Accompanied by Ms. Liu Danyin, vice general manager of KOSUN, Russian customers paid a visit to the production line of each product. They spoke highly of the modernized factory, well-regulated production process, excellent production technologies and high enthusiasm of workers. The visit laid a solid foundation for long-term cooperation between us, and both parties are full of confidence in our future cooperation.

  • KOSUN New Year Topics

  • KOSUN Magnificently Appear in NEFTEGAZ 2014

    As the most professional manufacturer of solids control equipment and mud purification and circulation system, Kosun is on the point of appearing in NEFTEGAZ 2014. Kosun attaches great importance on this exhibition and will show such star products as LS703 linear Shale shaker, DC450*842 centrifuge and one CP series 55KW sand pump. 

    Neftegaz_2014 kosun

    As Sino-Russia relationship is increasingly becoming closer in recent years, Sino-Russia trade is developing rapidly, more and more Chinese products enter Russian market and local customers trust Chinese brands more. Early in 2011, Kosun successfully completed and delivered 750HP drilling solids control system project to Gazprom, which laid a favorable foundation for Kosun’s development in Russia and former Soviet Union area. The magnificent appearance of Kosun in NEFTEGAZ 2014 aims to further implement the “core strategy of localization” for Kosun’s international business. We do believe that along with deepening of localization strategy in Russian market, more and more customers in Russia will enjoy valuable services provided by Kosun. 

     

    Kosun Decanter Centrifuge On Neftegaz 2014

    NEFTEGAZ 2014 is the biggest professional oil exhibition held every two years in East Europe, gathering 1800 domestic and foreign exhibitors from 41 countries all over the world, serving as a platform for global suppliers to exhibit the latest technologies in oil and gas industry. The number of professional visitors attending the exhibition will be up to 38600, and they come from Russia, Germany, Britain, France, U.S.A., Italy, Australia, Kazakhstan, Kuwait, Ukraine, Saudi Arabia, etc. 

     

    Kosun Shale Shaker On Neftegaz 2014
    Kosun Shale Shaker On Neftegaz 2014

    Exhibition information: 

    Exhibition name: The 15th INTERNATIONAL TRADE FAIR EQUIPMENT AND TECHNOLOGIES FOR THE OIL AND GAS INDUSTRIES 

    Booth: 21E09

    Date: May 26-29, 2014

    Address: Expocenter Krasnaya Presnya, Moscow, Russia

    Contact: +7 916 5489526

    Tel.: +86 13520140242

    E-mail: sales@adkosun.com

    Website for reference: http://www.neftegaz-expo.ru

     

  • Go Deep into the Trend in Solids Control Equipment Improvement

    READ: It is well known everywhere that complete solids control equipment is an important demonstration of scientific drilling. The continuous enhancement within almost a decade remarkably brings about better drilling techniques, less maintenance on circulating system, faster drilling velocity and lower costs.

    It is well known everywhere that complete solids control equipment is an important demonstration of scientific drilling. The continuous enhancement within almost a decade remarkably brings about better drilling techniques, less maintenance on circulating system, faster drilling velocity and lower costs.

    Prior to 1970s, extremely primitive shale shaker took most work in oil drilling industry, but its separation diameter merely reached 400 μm in the best scenario and solid particles went back to circulating system again. Later on, the situation was progressively improved by the invention of ultra-fine mesh shale shaker, desander, desilter, drilling fluids decanter centrifuge, vacuum degasser, mud agitator, concocting devices as well as matching mud tanks, electrical control cabinet and so on, with total weight beyond 5 tons, aggregate power consumption close to 300kW, solid content controlled below 5% and mud’s low density properties available to adjust when needed.

    No doubt, these improvements transformed the oil drilling industry, but elevated drilling crew’s workload of in-situ repairing, keep-up, operation as well as energy consumption. Therefore, it has become a common concern for worldwide experts to get simpler equipment, less energy consumption and better reliability when making every attempt to weaken the system performance as little as possible.

    Recent developmental demands indicate it has been a trend to get simpler equipment, less energy consumption and better reliability, for which we project to work it out from two aspects: In the long run, we need study the practicality of an one-step method, though with awesome challenges but of adventurous nature. However, things usually develop from junior to senior, from simpler to more complex forms, which is the same with solids control equipment whose better efficiency and lower cost are mainly directed at by solids control scientific research. In the short run, we should develop multi-screen system with larger capacity, more stability and better separation, and work for less desander start-up time or even application, Xi’an KOSUN Machinery Co., Ltd., as the leading pioneer in China’s solids control system, will be devoting to continuous innovations and contribution to the oil drilling industry.

     

  • Causes and Solutions of Mud-related Pollutions

    READ: In drilling operations, drilling fluids are prone to be deteriorated by pollutions of H2S, plaster, brine, CO2, etc., exposing drilling safety to great risks and elevating the costs. As the mud attributes to successful drilling operations, environmental problems should be emphasized. Now, let’s discuss about causes and solutions of mud-related pollutions.

    In drilling operations, drilling fluids are prone to be deteriorated by pollutions of H2S, plaster, brine, CO2, etc., exposing drilling safety to great risks and elevating the costs. As the mud attributes to successful drilling operations, environmental problems should be emphasized. Now, let’s discuss about causes and solutions of mud-related pollutions.

    I. How does the mud pollute?

    1. On one hand, its difficult organic chemicals will form an insulating layer to prevent water penetration into soil and plants. On the other hand, the other organic chemicals will poison the plants in water.

    2. Its engine oil and diesel content are critically harmful to the soil, plants and water.

    3. Its salt and exchangeable sodium ions will crust the soil, complicate water penetration into the soil, do harm to the plants and immensely affect the ground water.

    4. Its rock cuttings will also harm the soil, plants, ground water and aquatic life, more or less.

    II. How should we lessen or even eliminate the pollution surrounding drilling field?

    1. Add setting liquid into finishing drilling fluids since the solidified fluids is environmentally conscious.

    2. Apply non-solids drilling fluids as much as is practical in order to readily carry the rock cuttings, to free of changing the fluids and to recycle the drilling fluids.

    3. Use quality fluids to settle as much rock cuttings as possible for better getting rid of rock cuttings.

    4. Install a desilter if possible to soften the solid content and extend the mud’s life cycle.

    5. Drill into the surface of the soil with the upper well drilling fluids.

    6. Bury the rock cuttings in a large hole and seal with plastic film.

    7. If possible, reduce or even stop adding the inorganic salt, especially the sodium salt or less biodegradable high-molecule chemicals.

     

  • U.S.A. OTC Grandly Opens; KOSUN Black Rhino Mud Cleaner Captures Massive Spotlight

    On May 5th 2014, Houston, Texas saw the 45th Offshore Technology Conference (short for OTC) opening grandly, which Xi’an KOSUN Machinery Co., Ltd. attended with its latest fruit—Black Rhino Mud Cleaner at the stand numbered 7535, and which gathered international, domestic oil equipment manufacturers and purchasers in tens of thousands to discuss oil equipment business at Reliant Park.

    Xi’an KOSUN Machinery Co., Ltd. at OTC
    Xi’an KOSUN Machinery Co., Ltd. at OTC
     
    Black Rhino Mud Cleaner by KOSUN on display
    Black Rhino Mud Cleaner by KOSUN on Display

    As the latest fruit of Xi’an KOSUN Machinery Co., Ltd., the Black Rhino Mud Cleaner on display is a bold innovation on the original after being further enhanced in function and adjusted in material selection, processing technology and model design, and is imparted more durability as well as better performance. The unique appearance design, distinctive color selection and eye-catching logo design appealed to many participants coming for inquiries, which were given detailed and satisfactory answers by the professional technicians and business personnel. After the communications, many companies have expressed their strong interest and purchase intention.

    Logo Design of KOSUN Black Rhino Portfolio
    Logo Design of KOSUN Black Rhino Portfolio

    KOSUN is a leader in China’s solids control industry and expert in drilling waste management. KOSUN is capable of providing customers with such four series as oil & gas drilling solids control equipment, centrifuges, drilling waste treatment equipment and drilling security equipment, including 25 categories of products, and can also customize packaged design and matching products of oil & gas drilling rigs for drilling contractors. The products provided by KOSUN are extensively used in oil & gas drilling and workover, coalbed methane drilling, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, municipal environment-friendly sewage treatment, industrial wastewater treatment, fruit juice purification, waste oil recovery and purification treatment, etc.

    KOSUN Solids Control Equipment, Inc welcomes your visit.
    Xi’an KOSUN Machinery Co., Ltd. Welcomes Your Visit

    “Houston”, the host city for OTC, is the state capital of Texas and the center of the largest global petroleum processing, petrochemistry as well as basic chemical industry, renowned as the “World Petroleum Capital” or the “World Energy Capital”. Its distinctive geographical advantages make it a unique business exchange stage for all the OTC companies and participants. Up till now, it has embraced 2,700 exhibitors and tens of thousands of professionals in the industry.

     

  • Comparison Analysis of Desilters Performances at Home and Abroad

    READ: Recent years have seen progressive roll-out and application of China’s mud purification system in different drillings, leapfrog development/great strides in manufacture techniques and theoretical researches, especially the latter one, but still some distance to parallel the other countries in performance and lifespan.

    China’s Desilter Performance

    Recent years have seen progressive roll-out and application of China’s mud purification system in different drillings, leapfrog development/great strides in manufacture techniques and theoretical researches, especially the latter one extending to shale shaker’s structural principle, desilter’s structural principle, etc, which have gone near to or reached the world’s frontier, but still some distance to parallel the other countries in performance and lifespan. The common set in China referring to double shale shaker and a single desander rarely with another desilter, produced less than ideal and under-exploited mud performance, reduced efficiency and wasted the mud. Then desilter was gradually developed.

    Other Countries’ Desilter Performance

    It is well represented by U.S. Baroid, Brandt, Sweco and so on because of their first-tier quality, function and higher standardization, serialization as well as customization. Their latest upgrading transformations in the design are mainly reflected on the driving mode of fine-mesh high-frequency shale shaker, tensioning mode of screens, cross-section shape of cyclone’s inlet passage, materials for upper, lower cones and lining, etc, and have been widely applied for better purification and stabler performance.

    At present, it is essential to equip every deep-water mud purification system with desilter and it is imminent to conduct more R&Ds of the vital part face with year-on-year increase of drilling rigs in China.