drilling mud

1. The liquid-gas separator should be tested after installation. Pour clean water or drilling fluid into the separator until there is liquid flowing out of the outlet pipe.

2, before use, the maximum allowable working pressure should be calculated

A brief introduction to the concept of oil-based mud

Oil-based mud, as the name suggests, is a drilling mud with oil as the main component. In oilfield drilling operations, oil-based mud is widely used because of its excellent lubricity, sand carrying ability and well wall protection. However, as drilling operations proceed, oil-based mud mixes with cuttings and various chemical additives to form complex mud systems.

Second, the importance of the treatment of oil-based mud

First, the importance of waste oil-based drilling fluid treatment
Waste oil-based drilling fluid is a drilling fluid used in drilling. The main components are oil and drilling sludge. Because it contains a large amount of waste oil, if it is direct

In the process of oilfield drilling, the total amount of waste is large, the content of pollutants is high, the pollution control of waste is concentrated in the end treatment, the degree of resource utilization is low, the cost is high, the pollution control in the process of drilling can not be realized, and the ecological environment of the oilfield is seriously affected. Aiming at the key technical problems of environmental protection in the drilling process, with the goal of “reduction, harmless and resource utilization”, Xi ‘an Kesun has carried out theoretical research, equipment research and development, technical research and integrated application, and conquered the core technologies of the reduction of drilling waste during drilling and the harmless treatment and resource utiliza

Piling mud treatment equipment is specially for piling engineering, in the construction site for piling engineering equipped with mud treatment equipment, mainly used in the construction process of large-scale piling engineering mud treatment. The use of piling mud treatment equipment for mud treatment at the construction site can effectively improve the construction efficiency of the construction site, reduce the labor intensity of workers at the construction site, improve the construction environment, and reduce the cost of the entire project.

The working efficiency and effect of sludge and waste soil treatment can not be ignored in the construction of sludge shield. At present, the main difficulties in sludge and waste soil treatment are as follows:

1. If the diameter of shield tunnel excavation is up to 15 m, the sludge water treatment capacity is large, the coordination difficulty is high in all aspects, and the mud pump load is too large, the mud water supply is insufficient on the excavation surface, or the processing capacity is insufficient. Therefore, reasonable equipment selection and sludge water site layout are very important. The formation of mud film is difficult in the long distance sand and gravel stratum with high permeability and high water pressure, which requires high pulping capacity, conveying capacity and

In the oil and gas industry, the efficient management of drilling waste is crucial for both environmental protection and operational cost-effectiveness. Solids control equipment plays a vital role in this process, ensuring that drilling fluids are pr

In order to separate the solid and liquid in the mud, reduce the specific weight of the mud, and improve the performance of horizontal drilling operations, we often use mud-water separation systems.

1, the composition of mud-water separation system

In this ever-changing era, the development of science and technology is constantly promoting the progress of all walks of life. In the field of oil drilling, the reliability of equipment has a direct impact on the production efficiency and cost of oil