cyclone

Cyclone and its application in solid phase control of drilling fluid

I. Hydrocyclones and Their Application in Solid Phase Control of Drilling Fluids I. Overview of Hydrocyclones A hydrocyclone is a device that uses centrifugal force for solid-liquid separation and is widely used in solid phase control of drilling fluids. According to their structural and functional differences, cyclones are mainly classified into three types: sand removers, desilters and micro cyclones.

Cyclone and its application in solid phase control of drilling fluid Read More »

Vertical cyclone desilter

The vertical cyclone desilter is a highly efficient solid-liquid separation device, mainly used to remove fine sludge, suspended solids and other low-density solid particles from liquids. It is widely applied in industries such as oil drilling, mining and mineral processing, sewage treatment, and chemical engineering. Compared with the desander cyclone, the desilter is more focused on handling finer particles (typically 5-74m), and is suitable for scenarios such as slurry purification and liquid refinement. ​ Working principle of vertical cyclone desilter: The liquid-mixed mud and sand enter the cyclone tangentially. Under the action of the centrifugal force generated by high-speed rotation, the denser mud particles are thrown towards the wall of the cyclone and slide down along the cone

Vertical cyclone desilter Read More »

Several Vital Cyclone Adjustment Know-hows

READ: As the indispensable part of desander for separating solids, cyclones in different specifications work against different diameters and for different cleannesses. Besides, separation capacity is closely related with cyclone diameter since larger diameter is aimed at larger particles while smaller one contends with smaller particles. As the indispensable part of desander for separating solids, cyclones in different specifications work against different diameters and for different cleannesses. Besides, separation capacity is closely related with cyclone diameter since larger diameter is aimed at larger particles while smaller one contends with smaller particles. I. Installation Maintenance: 1. Desander ought to be installed on a well-prepared, flat foundation or merely on the ground. Th

Several Vital Cyclone Adjustment Know-hows Read More »

Solutions for Four Common Underflow Problems of Cyclone

READ: When cyclone works, high-speed swirling movement generates the air column and low-pressure area, creating suction towards underflow outlet. This cyclone is often found in mud cleaners where solid-content fluids enters and solids leave through underflow outlet. When cyclone works, high-speed swirling movement generates the air column and low-pressure area, creating suction towards underflow outlet. Inject some water into cyclone by certain pressure and adjust the outlet till it allows no fluid flow, meaning it reaches the balance point.

Solutions for Four Common Underflow Problems of Cyclone Read More »